high Voltage 600V 3A Dc Power Supply Lab Overvoltage Protection
Stabilized Voltage Constant Current
PART 1: FEATURES
(1) Input voltage (on demand)
Single-phase AC220V/AC110V + / - 15%; 50 hz 60 hz
Three-phase AC380V/AC220V + / - 15%; 50 hz 60 hz
(2) The output voltage can be an adjustable range (0 ~ 3000V).
(3) The output constant current value can be adjusted range (0 ~ 2000A).
(4) Adjustment rate of source voltage: stable pressure is less than
0.5%; Load adjustment rate: stable pressure is less than 1%;
Constant flow is less than 2%.
(5) Ripple voltage: total ripple voltage Vpp is less than 2%; Machine
efficiency: > 86%.
(6) Number display: output voltage: display accuracy plus or minus
1.2%; Output current: display accuracy plus or minus 1.5%.
(7) The output voltage is overcharged: the maximum output is less than
2%.
(8) Low insulation resistance: the input - output:≥20 MΩ; Input -
casing: ≥20 MΩ; output - casing: ≥20 MΩ.
(9) Strength of insulation: input - output: AC1500V, 10mA, 1 minute.
(10) Input - chassis: AC1500V, 10mA, 1 minute;
(11) Output - case: AC1500V, 10mA, 1 minute.
(12) Low engine overheating protection threshold temperature: 75 ~ 85
℃.
(13) Average failure time: greater than 50000h.
PART 2: CHARACTERISTIC
1. small size, lightweight, high efficiency (89% above), wide
isolation, wide input range (maximum 20%).
2. Provide protection against surge protection and avoid the
instantaneous current overshoot.
3. The output voltage current can be adjusted in a wide range so
that users can use it flexibly.
4. The output voltage current and high brightness digital tube
display, clean and intuitive.
5. The reliability of the whole machine is improved by
overpressure, overflow, under pressure, overheat, etc.
6. In order to achieve higher power output, automatic equal-flow
technology can be used for multi-machine parallel expansion.
PART 3: SPECIFICATION
| Brand | IDEALPLUSING |
| Model | IPS-ATDY15001 |
| AC Input | Single phases 220VAC |
| Input Voltage Range | 220VAC±15% |
| Input frequency | 50Hz/60Hz |
| Output voltage | 0~1500VDC |
| Output current | 0~1A |
| Output Power | 1500W |
| Voltage Stabilization | ≤0.3%+10mV |
| Load Stabilization | ≤0.5%+30mV |
| Ripples and Noises | ≤0.5%+10mVrms |
| Voltage Display Accuracy | 4-digit Accuracy: ±1%+1 word (10%-100% rating) |
| Display Format | 0.000V-9.999V; 0.00V-99.99V; 0.0V-999.9V |
| Current Display Accuracy | 4-digit Accuracy: ±1%+1 word (10%-100% rating) |
| Remote Adjustment | (Analog control: Voltage adjustable ):0-5VDC;(Current
adjustable):0-5VDC |
| Remote Display | (Analog control: Voltage adjustable ): 0-5VDC;(Current
adjustable):0-5VDC |
| Output Over-Voltage Protection | Built-in O.V.P. protection, protection limited value is rated +5% |
| Output Over Load Protection | Overload, current limit, constant current output |
| Over Temperature Protection | Built-in O.T.P. protection, Protection value 85℃±5% heat sink
temperature |
| Voltage Setting | 10-turn precision potentiometer |
| Current Setting | 10-turn precision potentiometer |
| Output Polarity | Output Positive(+) negative(- ) Can be grounded at will |
| Heat Dissipation Way | Forced fan cooling |
| Work Conditions | Indoor use design, Temperature:0℃~40℃; Humidity: 10%~85%RH |
| Storage Conditions | Temperature:-20℃~70℃; Humidity: 10%~90%RH |
| Machine Dimension | L483*W430*H90(MM) |
| Net Weight/Gross Weight | 13KG/15KG |
PART 4: CUSTOMIZE
About the dc power supply high voltage, We can customize different
kind of specification according to your request. Such as:
(1)Input voltage: 1 phase 110Vac/220Vac or 3 phases 380Vac/480Vac;
(2)Output voltage: 0-20000V variable or appointed;
(3)Output current: 0-10000A variable or appointed.
(4)Serial port: RS232,RS485,timing switch.
PART 5: PICTURE
Application field It is widely used in industrial control,
electronic power, electroplating, communication, scientific
research, instrumentation, military industry, medical treatment,
shipbuilding, railway and other high-tech fields.
Motor category Electric vehicle motors, electric vehicle
controllers, DC motor testing, etc.
Electric appliances LED testing and aging, energy-saving bulb
testing and aging, lamp testing, tungsten filament gasification,
etc.
Automotive Automotive electronics, DC motors, car motor
controllers, car lights, cigarette lighters, car audio and video
Electronics Capacitors, resistors, relays, transistors, sensors,
etc.
Display category Display screen, liquid tank screen, touch screen,
car DVD, mobile phone display, etc. Electrochemical Electrolysis,
electroplating, anodizing, non-ferrous metal research, etc.
Other categories Other areas of product testing and research and
development that require DC power supply
